Prekės informacija
Prekės aprašymas anglų kalba:
The aquaero is an absolutely autonomous working microprocessor-controlled device with USB 2.0 interface. All speed parameters and sensor values can be set and visualized in an user-friendly menu or through an even easier to use PC-software. Additionally, the graphic LC display can be used to display almost any information using the popular LCD software LCDHype.
The key features of the aquaero 5 include:
Several aqua computer products can be used to expand the functionality of the aquaero 5 Controller. These expansions are dynamically mapped into the menus and display pages of the aquaero, creating a consitent control system rather than individual devices.
In maximum configuration, the following devices can be connected to an aquaero 5 simultaneously:
2x aquastream XT/ULTIMATE pumps
8x poweradjust 2/3
2x aquaero 5/6 LT (in this case no poweradjust 2/3 can be connected)
4x mps based devices (flow sensor, pressure/fill level sensor and D5 pump with aquabus)
2x farbwerk controller
1x Real Time Clock expansion module
Power consumption without any connected load: about 1 watt at 5 volt.
Scope of delivery:
- aquaero 5 PRO controller
- four temperature sensors, length approx. 70 cm
- one internal USB cable, length approx. 100 cm
- one connection cable for speed signal or aquabus
- manual
- mounting material for installation into a free extension bay
Notes on the aquasuite software:
With this product you receive a license for the current and next year version of the software. Please note that an Internet connection is required for the installation and activation of the software. Further information about the licensing and activation of the aquasuite software can be found.
The aquaero is an absolutely autonomous working microprocessor-controlled device with USB 2.0 interface. All speed parameters and sensor values can be set and visualized in an user-friendly menu or through an even easier to use PC-software. Additionally, the graphic LC display can be used to display almost any information using the popular LCD software LCDHype.
The key features of the aquaero 5 include:
- Programmable four channel fan controller
- Graphic LC display with backlight (except LT version)
- USB 2.0 and aquabus interface
- Four fan outputs with current measurement
- Versatile control options
- Eight temperature sensor inputs
- Flow sensor input
- Universal IR receiver (except LT version)
- Three LED outputs
- Potential-free switch
- Two additional power outputs
- Extensive alarm options
- Acoustical alarm
- Speed signal output for status evaluation
- Expandable to a maximum of 10 fan channels
Several aqua computer products can be used to expand the functionality of the aquaero 5 Controller. These expansions are dynamically mapped into the menus and display pages of the aquaero, creating a consitent control system rather than individual devices.
In maximum configuration, the following devices can be connected to an aquaero 5 simultaneously:
2x aquastream XT/ULTIMATE pumps
8x poweradjust 2/3
2x aquaero 5/6 LT (in this case no poweradjust 2/3 can be connected)
4x mps based devices (flow sensor, pressure/fill level sensor and D5 pump with aquabus)
2x farbwerk controller
1x Real Time Clock expansion module
Power consumption without any connected load: about 1 watt at 5 volt.
Scope of delivery:
- aquaero 5 PRO controller
- four temperature sensors, length approx. 70 cm
- one internal USB cable, length approx. 100 cm
- one connection cable for speed signal or aquabus
- manual
- mounting material for installation into a free extension bay
Notes on the aquasuite software:
With this product you receive a license for the current and next year version of the software. Please note that an Internet connection is required for the installation and activation of the software. Further information about the licensing and activation of the aquasuite software can be found.
Dažnai perkama kartu
Atminties kortelė SanDisk, 64 GB, 160 Mb/s - 150 Mb/s
Įprasta kaina
88,90 €
Smart leasing 9
Smart leasing 9
Smart leasing 9
