Name: Spec. paskirties dažai, radiatoriams Dekoral Radiator, balta, 0.75 l
Brand: Dekoral
Price: 9.99 EUR
Availability: OutOfStock

Prekės informacija

Bendrosios charakteristikos

Prekės tipas
Spec. paskirties dažai

Prekės ženklas
Dekoral
Kolekcija
Radiator
Kiekis pakuotėje, l
0.75
Dažų tipas
Specialios paskirties dažai
Spalvos pavadinimas
Balta
Spalva
Balta
Blizgumas
Blizgus
Skiediklis
Vanduo
Skirta apdailos darbams
Vidaus
Dažų paskirtis
Radiatoriams
Tinka dengti paviršius
Skardą
Išeiga
12 m²/l
Darbo įrankiai
Purkštukas, Teptukas, Volelis
Džiūvimo laikas (prieš liečiant)
2 - 3 h
Džiūvimo laikas (prieš perdažant)
4 h
Visiškai išdžiūsta po
72 h
Tinka karščio veikiamiems paviršiams
Taip
Papildoma informacija
Radiatoriams ir kitiems metaliniams paviršiams dažyti, kur reikalingas atsparumas karščiui, kad nepageltonuotų.

Prekės atspalvis gali skirtis nuo matomo nuotraukoje.

Dekoral Radiator Acrylic Paint 0.75l White
Prekės aprašymas anglų kalba:

The most important features:

It is suitable for copper elemanns
It does not turn yellow
Resistance to temperature of 100ºC
waterborne
Fast drying

Short description:

Water-borne acrylic enamel is intended for protective and decorative painting of metal, copper and cast iron elements, in particular heating devices protected against corrosion or for renovation painting. Resistant to temperatures up to 100ºC.

Application method:

Preparation of the substrate

The surface to be painted must be cleaned of dirt, ground, degreased and dried.
In the case of renovation painting, before painting, the surface should be sanded with fine-grained abrasive paper. To degrease the painted surface, use water with the addition of detergent.
Old loosely adhering paints must be removed.
The surfaces and copper tubes should be thoroughly sanded with fine grit sandpaper to reveal the proper surface, welds and burrs smoothed with steel brushes.
All elements must be degreased.

Painting

Before use, the product should be mixed thoroughly.
If necessary, dilute the drinking water in the max. 2% vol.
Apply directly to cleaned surfaces.
Paint with a brush or roller.
Recommended number of layers: 2-3.
Apply the second coat after a minimum of 4 hours.

Additional information

The coating obtains full operational properties after 72 hours.
Always paint cold radiators at an ambient temperature of + 10ºC to + 30ºC.
After finishing the painting, the tools should be washed thoroughly under running water.

Safety instructions and PPO

Keep away from children.
If swallowed, seek medical advice immediately - show the packaging or label.
During painting works and after their completion, ventilate a specific odor before use.
Follow the instructions on the packaging.