Prekės informacija
Prekės aprašymas anglų kalba:
The R1 Universal at a Glance
Optimised Airflow Output of the R1 Universal With the R1 Universal CPU cooler, Cryorig uses seven 6mm thick heatpipes that connect the nickel-plated copper base plate to the two towers of the heat sink. The special feature, however, is the design of the fins of the twin-tower CPU cooler. The cooling fins in the front area have a distance of 2.4 mm, while the rear area has a distance of only 1.8 mm. These different distances ensure an optimized outgoing air flow through compression of the air. Cryorig calls it Jet Fin Acceleration System. This allows the heated air to be removed from the tower cooler more quickly.
The two finned coolers of the respective cooling tower and the heatpipes in between are welded together in a special soldering process, so that ten percent more surface contact is achieved. The heatpipes are also arranged offset between the two fins, which also ensures optimum heat distribution. The R1 Universal comes with Cryorig's XF140- fan and the slimmer XT140-fan. Thus, the R1 Universal does not exceed the memory slots and can also be used alongside oversized RAM modules. As an effective anti-vibration measure, four rubber dampers are embedded in each of the two fans at the corners. This dampens the vibration transmission of the fans to the fins. The fans themselves have an extraordinarily quiet bearing, so that the noise level of the entire cooler is 44 dB (A) quiet. Thanks to its outstanding performance and efficiency, the twin-tower cooler is suitable for processors with 240 Watt TDP (Thermal Design Power).
The extremely easy installation is particularly smart. The backplate is fixed by hand with knurled screws. This is followed by the holding frame for the CPU, which is also fastened with knurled screws. The heat sink is then attached using the enclosed screwdriver. Thermal conductive paste and a cloth for removing residues are included in the bundle. Mounting clips for an optional third fan are also included.
Registering your product with Cryorig allows you to extend the manufacturer's warranty from three to six years.
Cryorig, a relatively young company, quickly became famous for its efficient and innovative products in the field of CPU cooling. The team of experienced radiator and OC experts rely on high-quality materials and innovative combinations of individual components to get the most out of air coolers. At the same time, Cryorig attaches great importance to keeping the installation of its CPU coolers as simple as possible. The coolers from Cryorig like this Twin-Tower CPU Cooler R1 Universal also offer an impressive aesthetic.
The R1 Universal at a Glance
- Twin-tower coolers in copper and aluminium for best cooling performance
- Suitable for installation with oversized RAM modules
- Specially arranged cooling fins ensure optimum removal of residual heat
- Suitable for processors with up to 240 Watt TDP
- Height: 168,3 mm
- Compatible with all current AMD- and Intel sockets
- Uncomplicated installation
Optimised Airflow Output of the R1 Universal With the R1 Universal CPU cooler, Cryorig uses seven 6mm thick heatpipes that connect the nickel-plated copper base plate to the two towers of the heat sink. The special feature, however, is the design of the fins of the twin-tower CPU cooler. The cooling fins in the front area have a distance of 2.4 mm, while the rear area has a distance of only 1.8 mm. These different distances ensure an optimized outgoing air flow through compression of the air. Cryorig calls it Jet Fin Acceleration System. This allows the heated air to be removed from the tower cooler more quickly.
The two finned coolers of the respective cooling tower and the heatpipes in between are welded together in a special soldering process, so that ten percent more surface contact is achieved. The heatpipes are also arranged offset between the two fins, which also ensures optimum heat distribution. The R1 Universal comes with Cryorig's XF140- fan and the slimmer XT140-fan. Thus, the R1 Universal does not exceed the memory slots and can also be used alongside oversized RAM modules. As an effective anti-vibration measure, four rubber dampers are embedded in each of the two fans at the corners. This dampens the vibration transmission of the fans to the fins. The fans themselves have an extraordinarily quiet bearing, so that the noise level of the entire cooler is 44 dB (A) quiet. Thanks to its outstanding performance and efficiency, the twin-tower cooler is suitable for processors with 240 Watt TDP (Thermal Design Power).
The extremely easy installation is particularly smart. The backplate is fixed by hand with knurled screws. This is followed by the holding frame for the CPU, which is also fastened with knurled screws. The heat sink is then attached using the enclosed screwdriver. Thermal conductive paste and a cloth for removing residues are included in the bundle. Mounting clips for an optional third fan are also included.
Registering your product with Cryorig allows you to extend the manufacturer's warranty from three to six years.
Dažnai perkama kartu
UPS įtampos stabilizatorius Orvaldi 650SP, 390 W
Įprasta kaina
84,99 €
/ vnt.
Smart leasing 9
Smart leasing 9
Smart leasing 9
Smart leasing 9
Monitorius AOC X24P1, 24", 4 ms
Įprasta kaina
269,90 €
Smart leasing 9
Smart leasing 9
Smart leasing 9
Monitoriaus laikiklis NewStar FPMA-D700D, 19-27"
Įprasta kaina
200,90 €
Smart leasing 9
Privatumo filtras (Privacy filter) Targus, 23.8 "
Įprasta kaina
96,90 €
Įprasta kaina
68,90 €
Smart leasing 9
