Name: Oro aušintuvas korpusui Alphacool Eiszyklon Aurora LUX PRO2 Digital RGB, 120 mm x 120 mm
Brand: Alphacool
Price: 19.59 EUR
Availability: OutOfStock

Prekės informacija

Bendrosios charakteristikos

Prekės tipas

Oro aušintuvai

Prekės ženklas

Alphacool

Modelis

Eiszyklon Aurora LUX PRO2 Digital RGB

Paskirtis

Korpusui

Spalva

Juoda

Techniniai duomenys

Maksimalus sūkių dažnis per minutę

2000 rpm

Foninis apšvietimas

Taip

Triukšmo lygis

20 - 29.9 dB

Matmenys ir svoris

Plotis

120 mm

Gylis

25 mm

Aukštis

120 mm

Papildomai

Garantija

24 mėn

Papildoma informacija

RGB apšvietimas

Prekės atspalvis gali skirtis nuo matomo nuotraukoje.

The Alphacool Eiszyklon Aurora LUX Pro 2 fan is also used on the Alphacool Eisbaer Aurora series and, in addition to a wide control range, also offers outstanding digital RGB LED lighting. The individually controllable 5V aRGB LEDs paired with the special design of the fan frame create unique effects.

Ingenious lighting
Digitally addressable 5V RGB LEDs are built into the frame and illuminate the entire frame on both sides. The frame is not completely transparent, but the lighting is through narrow slits that are interrupted at four points. There are two rows of these slot-shaped recesses on the top. A narrow frame runs along the inside and outside of the frame. This creates a unique lighting that looks very noble. Thanks to the recessed diffusers, the light is distributed evenly. This avoids punctual illumination. Individual LEDs are no longer recognizable.

Wide control range and silent
The fan can be controlled from 700 to 2000 rpm via the 4-pin PWM connection. The fan is almost silent at 700 rpm, but still offers a good air flow rate paired with a high static pressure. This means that the fan can also be used very well on radiators for water cooling. Thanks to the high air flow, the fan is also ideal for ventilating a housing. Decouplers can also be found directly on the frame. The soft foam pads reduce the transmission of vibrations to the housing. Another plus point for the silent ability of the fan.

Connections?
The fan is controlled via a 4-pin PWM connector. The cable is 50 cm long. This means that the fan can also be connected to the mainboard or a special controller without additional adapter cables or extensions. The digital aRGB LED lighting is controlled via a JST 3-pin connector.