Prekės informacija
Gorenje JC 4800 VWX
Prekės aprašymas anglų kalba:
Slow-speed juicing at 70 rpm.
Low-speed technology is different from the conventional vortex method for obtaining juice from pieces of vegetables and fruits. Traditional juicerhas a rotating fruit and vegetable grinding wheel at speeds up to 2,500 rpm. The material is rubbed and as a result we get juice and pulp. This results in a high temperature destroying most vitamins and nutrients in the juice obtained in this technology. In low-speed extruders, the vertical movement of the screw at the speed of 70 rpm. crushes fruits and vegetables separating the juice from the pulp. As a result, due to this innovative technology, no air bubbles form in the juice and the consistency of the juice is constant. The juice obtained in this way contains all the vitamins and enzymes contained in fruits and vegetables.
Adjusting the amount of pulp. The consistency of juice exactly the way you like it.
The pulp produced as a result of squeezing the juice is collected in a separate container. The amount of pulp can be set by the lever located on the front of the device. Enjoy a glass of silky smooth juice or add pieces of vegetables or fruit to get a pleasant look. Do not throw away the obtained pulp - you can always use it in desserts, or join soups and sauces.
Quiet operation
The low-speed extrusion allows for a comfortable preparation of the juice due to the lack of disturbing noise of the spinning disk present in the devices of the older generations. In addition to operating the device at idle speed, the noise is also suppressed by a specially designed device construction. The sounds resulting from normal operation are mostly damped inside the device.
Powerful 200W engine
Despite the slow rotation of the worm gear, the engine must be strong enough to crush harder pieces of fruit and vegetables. Tested at the maximum load, 200W engine proved that it is a strong and durable heart of a low-speed juicer
No dripping
The juice container is full now but there are still fruits and vegetables processed into juice. What to do ? You do not have to turn off the juicer. Instead, close the drain hole with the cap. The juice will accumulate in the inner container while you pour the juice into glasses of people waiting for the tasting. At any time, you can replace the juice container again to have as much as you need for the next one.
Simple cleaning
Do you think that a large device capacity means cumbersome cleaning? Not necessarily. After finishing work with the appliance, slowly pour 1 liter of lukewarm water through the fruit delivery opening. Without any effort, the device will be cleaned of juice squeezing residues. Rinse only the filter and clean it with the brush attached to the device.
Safety switch
Safety guaranteed! The juicer will only work if all parts are properly assembled.
Prekės aprašymas anglų kalba:
Low-speed technology is different from the conventional vortex method for obtaining juice from pieces of vegetables and fruits. Traditional juicerhas a rotating fruit and vegetable grinding wheel at speeds up to 2,500 rpm. The material is rubbed and as a result we get juice and pulp. This results in a high temperature destroying most vitamins and nutrients in the juice obtained in this technology. In low-speed extruders, the vertical movement of the screw at the speed of 70 rpm. crushes fruits and vegetables separating the juice from the pulp. As a result, due to this innovative technology, no air bubbles form in the juice and the consistency of the juice is constant. The juice obtained in this way contains all the vitamins and enzymes contained in fruits and vegetables.
The pulp produced as a result of squeezing the juice is collected in a separate container. The amount of pulp can be set by the lever located on the front of the device. Enjoy a glass of silky smooth juice or add pieces of vegetables or fruit to get a pleasant look. Do not throw away the obtained pulp - you can always use it in desserts, or join soups and sauces.
The low-speed extrusion allows for a comfortable preparation of the juice due to the lack of disturbing noise of the spinning disk present in the devices of the older generations. In addition to operating the device at idle speed, the noise is also suppressed by a specially designed device construction. The sounds resulting from normal operation are mostly damped inside the device.
Despite the slow rotation of the worm gear, the engine must be strong enough to crush harder pieces of fruit and vegetables. Tested at the maximum load, 200W engine proved that it is a strong and durable heart of a low-speed juicer
The juice container is full now but there are still fruits and vegetables processed into juice. What to do ? You do not have to turn off the juicer. Instead, close the drain hole with the cap. The juice will accumulate in the inner container while you pour the juice into glasses of people waiting for the tasting. At any time, you can replace the juice container again to have as much as you need for the next one.
Do you think that a large device capacity means cumbersome cleaning? Not necessarily. After finishing work with the appliance, slowly pour 1 liter of lukewarm water through the fruit delivery opening. Without any effort, the device will be cleaned of juice squeezing residues. Rinse only the filter and clean it with the brush attached to the device.
Safety guaranteed! The juicer will only work if all parts are properly assembled.
Dažnai perkama kartu
