Prekės informacija

Bendrosios charakteristikos

Prekės tipas
Įkroviklis

Prekės ženklas
ABL
Modelis
1W1108
Spalva
Juoda
Ilgis
116 mm
Plotis
221 mm
Aukštis
272 mm
Įtampa
400 V
Srovė
16 A
Laido ilgis
6.35 m
Komplekte
1 sieninė dėžė ABL 1W1108 eMH1 Basic 11 kW
Papildoma informacija
Elektromobiliams įkrauti, atsarginis saugiklis: 16 A (reikalingas vietoje), rekomenduojama C charakteristika; Tinklo ryšys: maks. 5 x 6 mm²; Prijungimo gnybtai: tiesioginis prijungimas prie liekamosios srovės grandinės pertraukiklio, PE: 6 mm² įvadinis gnybtas

Prekės atspalvis gali skirtis nuo matomo nuotraukoje.

ABL 1W1108 eMH1 Basic 11KW

The ABL eMH1 Basic 1W1108 is a compact wall box with a permanently integrated charging cable and type 2 connector for installation in private and semi-public areas. Thanks to its extremely compact dimensions, it is the perfect solution for efficiently charging electric vehicles with type 2 charging sockets indoors and outdoors. The annoying "fetching the charging cable from the trunk" is no longer necessary. Simply connect the charging connector to the vehicle and the charging process can begin. The integrated residual current circuit breaker offers a particularly high level of safety during operation. The ABL DC fault current detection is already integrated as standard.

DC fault current detection (electronic, IΔn dc ≥ 6 mA), load switch (contactor, 4-pole), welding detection (triggering when the contactor welds), overcurrent protection, temperature monitoring, cover can be locked with an integrated lock

IMPORTANT:
The subsidy must be applied for BEFORE purchasing the charging station! Subsequent submission is unfortunately not possible!
A prerequisite for the subsidy is that only electricity from renewable energies is used for the charging stations, e.g. directly from your own photovoltaic system or via an energy supplier.
company Funding opportunities when buying a charging station for companies!
Here is an overview of the most important information and requirements:
Subsidy of up to 900 euros per charging point, for the purchase and installation of charging stations that are not publicly accessible, for charging company vehicles and private vehicles of employees, for companies and municipal companies, freelancers and nonprofit organizations.
For companies -> https://www.kfw.de/inlandsfoerderung/UNTERNEHMEN/Energie-und-Umwelt/F%C3%B6rderprodukte/Charging stations-f%C3%BCr-Elektrofahrzeug-UNTERNEHMEN-(441)/
municipalities Funding opportunities for municipalities when purchasing a charging station!
Here is an overview of the most important information and requirements:
Subsidy of up to 900 euros per charging point, for charging stations at parking spaces without public access, minimum subsidy amount 9,000 euros, minimum number of 10 charging points.
For municipalities -> https://www.kfw.de/inlandsfoerderung/%C3%96ffentliche-Institutions/Municipalities/Infrastructure/F%C3%B6rderprodukte/Nachhaltige-Mobilit%C3%A4tskonzepte-(439)/
notice A qualified electrician is required for installation, repair or maintenance! This also takes care of reporting to the local grid operator/energy supplier.
Residual current circuit breaker, type A, 30 mA required on site!
Further information Back-up fuse: 16 A (required on site), C characteristic recommended; Mains connection: max. 5 x 6 mm²; Connection terminals: direct connection to the residual current operated circuit breaker, PE: feed-through terminal 6 mm²