Prekės informacija
DEMCiflex Dust Filter Black DF0311 For XSPC EX 480
Prekės aprašymas anglų kalba:
If you open your PC again after half a year, perhaps to install new hardware, one wonders most of the time whether the Rechenknecht is not better to call a vacuum cleaner. What makes it easier on the one hand - imagine just how much more often the room would have to be cleaned if all the dirt was not collected as a precaution by the computer - means elsewhere consuming cleaning of the PC interior.
DEMCiflex offers a very easy-to-retrofit solution, which in this case is suitable for XSPC 480-mm radiators. Here, the filter is simply placed from the outside of the housing to the corresponding opening in the housing and is held there magnetically. There are therefore no screws or the like necessary, so there is no compatibility restriction.
The filter itself consists of a very tightly woven and durable polyester fabric. This special material is also used in clinics, for example to keep operating theaters dust-free. At the same time, the net is well permeable to air and therefore hinders the airflow only slightly.
Of course, this effect diminishes with increasing dust, which is why the filter should occasionally be removed and cleaned. Due to the special mounting method, the removal of the fan is again very easy and fast. Afterwards, the dust can either be brushed, shaken, washed off and even scraped off with stubborn dirt.
Note: The area around the used fan slot should be flat if possible and have no protruding parts. Otherwise, these may impair adhesion to the substrate.
Technical details:
Prekės aprašymas anglų kalba:

If you open your PC again after half a year, perhaps to install new hardware, one wonders most of the time whether the Rechenknecht is not better to call a vacuum cleaner. What makes it easier on the one hand - imagine just how much more often the room would have to be cleaned if all the dirt was not collected as a precaution by the computer - means elsewhere consuming cleaning of the PC interior.
DEMCiflex offers a very easy-to-retrofit solution, which in this case is suitable for XSPC 480-mm radiators. Here, the filter is simply placed from the outside of the housing to the corresponding opening in the housing and is held there magnetically. There are therefore no screws or the like necessary, so there is no compatibility restriction.
The filter itself consists of a very tightly woven and durable polyester fabric. This special material is also used in clinics, for example to keep operating theaters dust-free. At the same time, the net is well permeable to air and therefore hinders the airflow only slightly.
Of course, this effect diminishes with increasing dust, which is why the filter should occasionally be removed and cleaned. Due to the special mounting method, the removal of the fan is again very easy and fast. Afterwards, the dust can either be brushed, shaken, washed off and even scraped off with stubborn dirt.
Note: The area around the used fan slot should be flat if possible and have no protruding parts. Otherwise, these may impair adhesion to the substrate.
Technical details:
- Size (frame): 474.05 x 120 mm
- Compatibility:
XSPC EX 480
4x 120mm fan slot - Material (filter): polyester mesh
- Color: black (frame), black (filter)
- Assembly: mounting frame
- Advantages:
Fast installation
Easy and quick cleaning
Effective filter effect with high air permeability
Durable fabric