Prekės informacija

Bendrosios charakteristikos

Prekės tipas
Emaliniai dažai

Prekės ženklas
Dekoral
Kolekcija
Special
Kiekis pakuotėje, l
0.65
Dažų tipas
Emaliniai
Emalio tipas
Antikorozinis
Dažų spalva
Ruda
Blizgumas
Blizgus
Skiediklis
Neskiedžiama
Skirta apdailos darbams
Vidaus ir lauko
Dažų paskirtis
Metalo konkstrukcijoms, apsaugant nuo korozijos
Išeiga
9 m²/l
Darbo įrankiai
Purkštukas, Teptukas, Volelis
Tinka karščio veikiamiems paviršiams
Ne
Džiūvimo laikas (prieš liečiant)
2 - 3 h
Visiškai išdžiūsta po
24 h
Savybės
Alkidinis poliuretaninis emalis, atsparus atmosferos poveikiams. Tinkantis plieno ir ketaus paviršiams ar konstrukcijų elementams dažyti tiesiai ant paviršių, be išankstinio gruntavimo ar gruntinių dažų sluoksnio.
Papildoma informacija
Sudėtyje yra metiletilketoksimo, 2-etilheksanoinės rūgšties kobalto druskos. Gali sukelti alergiją.
Spalvos pavadinimas
Ruda

Prekės atspalvis gali skirtis nuo matomo nuotraukoje.

Prekės aprašymas anglų kalba:

The most important features:

Long-lasting painting effect
Excellent adhesion to the ground
Easy to use
No ground, no undercoat

Short description:

Corrosion-resistant enamel is intended for painting steel and cast iron objects as well as steel construction elements without the need for prior application of primer and primer paints. It is recommended for both interior and exterior painting.

Application method:

Preparation of the substrate

The steel and cast iron substrate should be carefully cleaned by removing oils, greases, dust, loose-fitting rust and old peeling paint with a wire brush, sandpaper or mechanical tools.
When renovating paints, old coatings should be matt with sandpaper and dusted off. Cracked and flaky coatings should be removed before painting.

painting

Before use, the product should be mixed thoroughly.
If necessary, it is recommended to dilute the product with a diluent for general-purpose phthalo products (max 3% by weight).
Paint with a brush, roller or spray.
For long-term corrosion protection, we recommend applying 2-3 coats. The next layer can be applied between 1 and 2 hours after applying the previous one or after 24 hours.

Additional information

Paint at a substrate temperature of + 10ºC to + 25ºC.
After finishing the painting, the tools should be cleaned with a thinner for general-purpose phthalo products.

Safety instructions and PPO

Flammable product.
Keep away from children.
Do not empty into drains.
If swallowed, seek medical advice immediately - show the packaging or label.
Use only in well-ventilated areas.
Store in tightly closed packaging away from sources of heat and fire.
During painting works and after their completion, ventilate a specific odor before use.
Follow the instructions on the packaging.
Detailed information is included in the Material Safety Data Sheet.